Delta AP300 Instruction Manual download pdf (Page 7)

ASSEMBLY

WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE TOOL TO THE POWER SOURCE UNTIL THE

MACHINE IS COMPLETELY ASSEMBLED AND YOU READ AND UNDERSTAND THE ENTIRE INSTRUCTION

MANUAL.

WHEEL CASTERS

1. Remove the 3/8-16 hex nut and 3/8" lockwasher

from each of the four wheel casters.

2. Place the dust collector on its side.

3. Insert bolt on wheel caster through the four holes (A)

Fig. 3 in the base of the dust collector.

4. Place a 3/8" lockwasher (A) Fig. 4 onto each bolt.

5. Thread a 3/8-16 hex nut (B) Fig. 4 onto each of the

four bolt heads and tighten securely.

Fig. 3

Fig. 4

EXHAUST FLANGE

1. Align the holes in the exhaust flange (A) Fig. 5 with

the holes in the exhaust flange gasket (B).

2. Insert a 5/16-18x5/8" hex head bolt thru the exhaust

flange, exhaust flange gasket and the base unit as

shown in Fig. 6.

3. Thread a 5/16-18 hex nut (B) onto the 5/16-18x5/8"

hex head bolt (A) Fig. 6 and tighten securely.

4. Repeat this process for the three remaining bolts.

Fig. 5

Fig. 6

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Delta AP300 Instruction Manual Page 7