Delta DVPEN01-SL User Manual download pdf (Page 26)

Ethernet Communication Module DVPEN01-SL

DVP-PLC Operation Manual

5.4 Setting up E-Mails

E-mail is the abbreviation of electronic mail, which transmits mails through the network. DVPEN01-SL has

E-Mail functions for the user to pre-save a segment of text messages, which can be a descriptive message or

error message, into the subject of the E-Mail. When the E-Mail is triggered, DVPEN01-SL will send the

messages to the user by E-Mail.

DVPEN01-SL offers 4 sets of E-Mail information, and you can self-define the register or bit information to be

read. When the trigger occurs, DVPEN01-SL will add the set register or bit present value read to the E-Mail.

Every set of E-Mail information is able to contain maximum 100 continuous register data.

 Setting up DVPEN01-SL mail

1. SMTP Server:

The E-Mail will first be sent to SMTP server, and SMTP server will send it to the designated

address. For example, assume there is an E-Mail to be sent to test@delta.com.tw

, and the

SMTP server is 172.16.144.121. The E-Mail will be sent to SMTP server first, and the server will

further send it to the recipient [email protected]

2. Subject of E-Mail:

You can enter text message in the column, and the message will be placed in the subject of the

E-Mail and sent to the recipient. DVPEN01-SL is able to contain 1 ~ 4 E-Mail subjects (max. 63

English characters are allowed).

You can select additional information for the E-Mail. Every set of E-Mail is able to contain 100

continuous addresses of registers.

3. E-Mail of Sender:

Maximum 63 English characters are allowed.

4. E-mail of Recipient:

You can enter 4 E-Mail addresses. One mail can be sent to 4 addresses (max. 63 English

characters are allowed).

5. Select recipients:

After you have set up all the parameters for the E-Mail, you will need to select recipients. The

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 57 58

No comments

Delta DVPEN01-SL User Manual Page 26