Delta PD-01 Specifications download pdf (Page 10)

PROFIBUS DP Slave Communicaion Module RTU-PD01

DVP-PLC Operation Manual

7 GSD File

The GSD file is a text file and can be used to identify PROFIBUS DP device (master or slave).A GSD

file usually contains the supplier’s information, baud rates supported and applicable I/O messages.

When using RTU-PD01, you have to first import the GSD file to the configuration software for

PROFIBUS DP master. After the import of the file, the configuration software for master will display

RTU-PD01 and its configuration settings. You can download the GSD file for RTU-PD01 at Delta’s

website: http://www.delta.com.tw/

8 RTU-PD01 Settings and Configurations

8.1 RTU-PD01 Settings

When you set up RTU-PD01 in the configuration software for PROFIBUS DP master, there will be

plenty of setup items for you to choose from, which adds flexibility to the manipulation of RTU-PD01.

See the figure below for RTU-PD01 settings.

Definitions of settings:

Setup item Setting Definition

Enable

When the Modbus device is configured with

many addresses and the addresses are

consecutive, all contents in the consecutive

addresses can be read or written at a time.

Acceleration mode

Disable

When the Modbus device is configured with

many addresses, only contents in a single

address can be read or written.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

No comments

Delta PD-01 Specifications Page 10