AH500 Quick Start
Click . Owing to the fact that only devices are monitored and modified, users do not need a
copy of the program.
If users want to alter the value in the device, they can click the right mouse button. The state of
SPP01_Man_SW is altered here. Owing to the fact that the device does not correspond to an
actual I/O device, users can set the device to ON or OFF.
After the state of SPP01_Man_SW is altered, users can get the following device monitoring
table.
If users do not want to monitor the devices, they can click
and close the device monitoring
table.
3-12
Comments to this Manuals