Delta 20-140 Instruction Manual download pdf (Page 9)

Fig. 14

Fig. 15

Fig. 16

Fig. 17

ADJUSTING

DOWNWARD TRAVEL

OF ABRASIVE WHEEL

A stop screw (A) Fig. 14, is provided to limit the down-

ward travel of the abrasive wheel. This adjustment is

made by loosening lock nut (B) and turning stop screw

(A) in or out as desired. Then tighten lock nut (B).

Fig. 15 illustrates edge of the arm casting (C) contacting

stop screw (A), limiting the downward travel of the

abrasive wheel. NOTE: As the abrasive wheel becomes

smaller in diameter (because of wear), the downward

travel of the wheel can be increased.

WRENCH STORAGE

A built-in clamp (A) Fig. 16, is provided on the back edge

of the machine base for convenient storage of the

adjusting wrench (B), which is supplied with your

machine.

Fig. 17 illustrates the wrench (B) stored in position inside

the clamp.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Delta 20-140 Instruction Manual Page 9