Delta 36-412 Service Manual download pdf (Page 16)

--- 12 ---

CAUTION:

Laser radiation - Do not stare into beam.

Laser radiation on work table. Do not stare into beam. If your eye is exposed directly to the laser

beam, it can be hurt.

Do not dismantle it.

Do not give strong impact to the laser marker (main body of tool); otherwise, the position of a laser

line can go out of order, resulting in the damage of the laser marker as well as a shortened service

life.

Keep the laser marker lit only during a cutting operation. Prolonged lighting of the laser marker can

result in a shortened service life.

Use of controls adjustments or performance of procedures other than those specified herein may

result in hazardous radiation exposure.

NOTE:

Perform cutting by overlapping the ink line with the laser line. When the ink line and the laser line

are overlapped, the strength and weakness of light will change, resulting in a stable cutting

operation because you can easily discern the conformity of lines. This ensures the minimum

cutting errors.

In outdoor or near-the-window operations, it may become difficult to observe the laser line due to

the sunlight. Under such circumstances, move to a place that is not directly under the sunlight and

engage in the operation.

Do not tug on the cord behind the motor head or hook your finger, wood and the like around it;

otherwise, the cord may come off and the laser marker may not be lit up.

The laser marker will not light up if the digital display switch is turned off. (Only Model C 12LDH)

Instruct the above precautions on the laser marker to the customers.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 75 76

No comments

Delta 36-412 Service Manual Page 16