Delta 36-978 Instruction Manual download pdf (Page 13)

To install the dust chute and back brace, place the saw

unit upside down on the floor as shown in Fig. 25.

PROTECT THE SAW’S TABLE TOP

BY PLACING SOMETHING BETWEEN

THE SAW AND THE FLOOR, SUCH AS A PIECE OF

CARDBOARD, CARPET ETC.

To install dust chute (A) Fig. 25, slide it in as shown.

Place back brace (B) with tabs (C) Fig. 25 below the

chute edge as shown in Fig. 26. To fasten the back

brace to the saw unit, place

/16-18 x

/8" Carriage Head

Screws up from inside the saw cabinet through holes

(E). Thread

/16-18 Serrated Hex Nuts on the screws and

tighten securely.

MOBILE BASE AND STAND

ASSEMBLY TO SAW

TO PREVENT PERSONAL INJURY OR

DAMAGE TO THE MACHINE, ASSEMBLE THE STAND

TO THE SAW AS FOLLOWS:

1. With the saw already upside down from installing

the dust chute and back brace, place the mobile

base and stand assembly on top of the upside-

down saw and align the eight holes in the legs (two

of which are shown at (A) Fig. 27) with the eight

holes (D) Fig. 26.

NOTE: Make certain the shorter panel with the Delta

nameplate is on the front of the saw next to the

scale and pointer.

2. In the holes (D) Fig. 26, place a

/16-18 x

/8" Carriage

Head Screw up from inside the saw cabinet and

then through the legs. Thread a

/16-18 Serrated Hex

Nut on the screw and tighten securely. Repeat for all

eight holes.

WITH A MINIMUM OF TWO PEOPLE,

CAREFULLY TURN THE SAW AND

STAND UPRIGHT AS SHOWN IN FIG. 28.

4. To make sure the table is level, kick up the foot pedal

see if table is level. If not, make adjustments to the

leveling feet as described in “LEVELING FEET” section

on the previous page. To raise saw onto the wheels, push

down on foot pedal.

Fig. 27

Fig. 28

Fig. 25

Fig. 26

DUST CHUTE AND BACK BRACE

DO NOT INSTALL DUST CHUTE UNLESS

A DUST COLLECTOR WILL BE USED.

Downloaded from www.Manualslib.com manuals search engine

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 36 37

Comments to this Manuals

No comments

Delta 36-978 Instruction Manual Page 13

Comments to this Manuals

Related products and manuals for Circular saws Delta 36-978