Delta 36-978 Instruction Manual download pdf (Page 19)

7. Assemble the blade guard and splitter assembly

(G) Fig. 47, between the large washer (C) and the

splitter bracket and tighten screw (H) with wrench

supplied. Slide splitter as far down as it will go.

8. Fasten the rear of the blade guard and splitter bracket

assembly (G) Fig. 48, to the rear splitter mounting

bracket. Align the hole (J) in the blade guard and

splitter bracket with the hole in the rear splitter

mounting bracket. Insert a 5/16-18 x 5/8" Carriage

Head Screw through the hole and place a 5/16" Flat

Washer on the screw and fasten with a 5/16-18 Hex

Nut, and tighten securely.

IMPORTANT: The splitter (G) Fig. 49, has a notch (L) cut

in the top edge as shown. This feature will enable the

blade guard to stay in the raised position to make blade

changing easier. Raise the front of blade guard (M), until

the rear edge of the blade guard slips into notch (L) of

splitter (G); the blade guard will stay in this position. This

feature only works when the table insert is removed.

Fig. 47

Fig. 48

Fig. 49

Fig. 50

9. With the blade guard (L) Fig. 50, in the raised

position, attach the saw blade (K) on the arbor with

the two arbor wrenches provided (No. 7 and 8,

Fig. 1). For more instructions on changing blades,

see “CHANGING THE SAW BLADE” section in this

manual.

Downloaded from www.Manualslib.com manuals search engine

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 36 37

No comments

Delta 36-978 Instruction Manual Page 19