Delta BS150LS Instruction Manual download pdf (Page 12)

OPERATION

Fig. 21

Fig. 22

Fig. 23

STARTING AND STOPPING SAW

Make sure that the switch is in the

"OFF" position before plugging cord into outlet. Do

not touch the plug’s metal prongs when unplugging

or plugging in the cord.

The "ON/OFF" switch is located on the front side of the

band saw. To turn the saw "ON", push the button (A) Fig.

21 in to the "ON" position. To turn the saw "OFF", push

the button (B) Fig. 22 in to the "OFF" position.

LOCKING SWITCH IN THE "OFF"

POSITION

IMPORTANT: When the tool is not in use, the switch

should be locked in the "OFF" position to prevent un-

authorized use, using a padlock (C) Fig. 22 with a 3/16"

diameter shackle.

In the event of a power outage (such

as a breaker or fuse trip), always move the switch to

the “OFF” position until the main power is restored.

OPENING AND CLOSING DOORS

When making adjustments such as changing the blade,

tracking the blade, blade guide adjustments, etc., the

doors (B) Fig. 23 can be opened as follows:

Never open the door when the machine

is running.

1. Pull out the two locking latches (A) Fig. 23, and swing

doors (B) open.

2. Fig. 23A illustrates the doors (B) in open position.

3. To close and fasten doors (B) Fig. 23, press on the

doors directly over the latches (A) until the latches

snap into the locking position.

Fig. 23A

OPERATIONAL CONTROLS AND ADJUSTMENTS

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 71 72

No comments

Delta BS150LS Instruction Manual Page 12