Delta MS210 Instruction Manual download pdf (Page 3)

FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.

1. FOR YOUR OWN SAFETY, READ THE INSTRUCTION

MANUAL BEFORE OPERATING THE MACHINE.

Learning the machine’s application, limitations, and

specific hazards will greatly minimize the possibility

of accidents and injury.

2. USE CERTIFIED SAFETY EQUIPMENT. Eye

protection equipment should comply with ANSI Z87.1

standards, hearing equipment should comply with

ANSI S3.19 standards, and dust mask protection

should comply with MSHA/NIOSH certified respirator

standards. Splinters, air-borne debris, and dust can

cause irritation, injury, and/or illness.

3. DRESS PROPERLY. Do not wear tie, gloves, or loose

clothing. Remove watch, rings, and other jewelry. Roll

up your sleeves. Clothing or jewelry caught in moving

parts can cause injury.

4. DO NOT USE THE MACHINE IN A DANGEROUS

ENVIRONMENT. The use of power tools in damp or

wet locations or in rain can cause shock or

electrocution. Keep your work area well-lit to prevent

tripping or placing arms, hands, and fingers in

danger.

5. MAINTAIN ALL TOOLS AND MACHINES IN PEAK

CONDITION. Keep tools sharp and clean for best and safest

performance. Follow instructions for lubricating and

changing accessories. Poorly maintained tools and

machines can further damage the tool or machine and/or

cause injury.

6. CHECK FOR DAMAGED PARTS. Before using the

machine, check for any damaged parts. Check for

alignment of moving parts, binding of moving parts,

breakage of parts, and any other conditions that may

affect its operation. A guard or any other part that is

damaged should be properly repaired or replaced.

Damaged parts can cause further damage to the

machine and/or injury.

7. KEEP THE WORK AREA CLEAN. Cluttered areas and

benches invite accidents.

8. KEEP CHILDREN AND VISITORS AWAY. Your shop is a

potentially dangerous environment. Children and visitors can

be injured.

9. REDUCE THE RISK OF UNINTENTIONAL STARTING.

Make sure that the switch is in the “OFF” position

before plugging in the power cord. In the event of a

power failure, move the switch to the “OFF” position.

An accidental start-up can cause injury.

10. USE THE GUARDS. Check to see that all guards are

in place, secured, and working correctly to prevent

injury.

11. REMOVE ADJUSTING KEYS AND WRENCHES

BEFORE STARTING THE MACHINE. Tools, scrap

pieces, and other debris can be thrown at high

speed, causing injury.

12. USE THE RIGHT MACHINE. Don’t force a machine

or an attachment to do a job for which it was not

designed. Damage to the machine and/or injury may

result.

13. USE RECOMMENDED ACCESSORIES. The use of

accessories and attachments not recommended by

Delta may cause damage to the machine or injury to

the user.

14. USE THE PROPER EXTENSION CORD. Make sure

your extension cord is in good condition. When using

an extension cord, be sure to use one heavy enough

to carry the current your product will draw. An

undersized cord will cause a drop in line voltage,

resulting in loss of power and overheating. See the

Extension Cord Chart for the correct size depending

on the cord length and nameplate ampere rating. If in

doubt, use the next heavier gauge. The smaller the

gauge number, the heavier the cord.

15. SECURE THE WORKPIECE. Use clamps or a vise to

hold the workpiece when practical. Loss of control of

a workpiece can cause injury.

16. FEED THE WORKPIECE AGAINST THE DIRECTION OF

THE ROTATION OF THE BLADE, CUTTER, OR

ABRASIVE SURFACE. Feeding it from the other

direction will cause the workpiece to be thrown out at

high speed.

17. DON’T FORCE THE WORKPIECE ON THE

MACHINE. Damage to the machine and/or injury may

result.

18. DON’T OVERREACH. Loss of balance can make you

fall into a working machine, causing injury.

19. NEVER STAND ON THE MACHINE. Injury could occur if the

tool tips, or if you accidentally contact the cutting tool.

20. NEVER LEAVE THE MACHINE RUNNING UNATTEN-

DED. TURN THE POWER OFF. Don’t leave the machine

until it comes to a complete stop. A child or visitor could be

injured.

21. TURN THE MACHINE “OFF”, AND DISCONNECT THE

MACHINE FROM THE POWER SOURCE before

installing or removing accessories, before adjusting or

changing set-ups, or when making repairs. An

accidental start-up can cause injury.

22. MAKE YOUR WORKSHOP CHILDPROOF WITH

PADLOCKS, MASTER SWITCHES, OR BY

REMOVING STARTER KEYS. The accidental start-

up of a machine by a child or visitor could cause

injury.

23. STAY ALERT, WATCH WHAT YOU ARE DOING,

AND USE COMMON SENSE. DO NOT USE THE

MACHINE WHEN YOU ARE TIRED OR UNDER THE

INFLUENCE OF DRUGS, ALCOHOL, OR MEDI-

CATION. A moment of inattention while operating

power tools may result in injury.

24. THE DUST GENERATED by certain woods and wood

products can be injurious to your health. Always

operate machinery in well-ventilated areas, and

provide for proper dust removal. Use wood dust

collection systems whenever possible.

1 2 3 4 5 6 7 8 ... 18 19

Comments to this Manuals

No comments

Delta MS210 Instruction Manual Page 3

Comments to this Manuals

Related products and manuals for Circular saws Delta MS210