Delta MS210 Instruction Manual download pdf (Page 7)

ROTATING TABLE

TO 90 DEGREE POSITION

1. Loosen table lock handle (A) Fig. 3 one or two turns

and depress index lever (B) to release 45 degree

positive stop.

2. Rotate table to the left until index stop engages with

the 90 degree positive stop (B) Fig. 4. Tighten table

lock handle (A).

Fig. 2

Fig. 3

For your own safety, do not connect the miter saw to the power source until the machine is

completely assembled and you read and understand the entire manual.

ATTACHING

TABLE LOCK HANDLE

Thread table lock handle (A) Fig. 2 into the threaded hole

(B) of the arm bracket.

Fig. 4

NOTICE: The manual cover photo illustrates the current production model. All other illustrations are

representative only and may not depict the actual color, labeling, or accessories, and are intended to illustrate

technique only.

ASSEMBLY

MOVING CUTTERHEAD TO THE UP POSITION

1. Push down on switch handle (A) Fig. 5, and pull out cutterhead lockpin (B).

2. Move the cutterhead (C) to the up position (Fig. 6).

Fig. 5

Fig. 6

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

No comments

Delta MS210 Instruction Manual Page 7