Delta MS265 Instruction Manual download pdf (Page 8)

1. Place the bevel lock handle screw (A) Fig. 3 onto the

bevel hub (B) on the base of the miter saw arm.

2. Thread the bevel lock handle screw (A) Fig. 3 onto the

bevel hub (B) by turning the bevel handle knob (C).

Tighten securely.

ASSEMBLY

FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL THE

MACHINE IS COMPLETELY ASSEMBLED, AND YOU READ AND UNDERSTAND THE ENTIRE INSTRUCTION

MANUAL.

ATTACHING MITER SAW ARM TO BASE

Fig. 3

ASSEMBLY TOOLS REQUIRED

ASSEMBLY TIME ESTIMATE

3mm hex wrench (supplied)

1/2" Blade Wrench (supplied)

Assembly time for this product will be about 30 minutes to an hour.

CARTON CONTENTS

1. Miter Saw Arm

2. Miter Saw Base

3. Table Lock Handle

4. Clamp

5. Dust Bag

6. 5mm Hex Wrench

7. 1/2" Blade Wrench

LIFTING THE MITER SAW BY THE SWITCH HANDLE CAN CAUSE MISALIGNMENT. ALWAYS LIFT

THE MACHINE BY THE BASE OR THE CARRYING HANDLE (SEE FIG. 20).

Remove the miter saw and all loose items from the carton.

DISCONNECT MACHINE FROM POWER SOURCE.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 22 23

No comments

Delta MS265 Instruction Manual Page 8