Delta 32-325 Instruction Manual download pdf (Page 9)

1. Clip the two table slides (A) Fig. 3 in the table

bracket (B).

2. Clip the remaining two table slides in the other table

bracket.

3. Center the table (C) Fig. 4 on the machine frame.

4. Position the table bracket (B) Fig. 5 against the

machine frame (D) and underneath the table (C).

Align the two holes (E) Fig. 6 in the table with the

two holes (F) Fig. 5 on top of table bracket (B) Fig.

5. Fasten the table to the table bracket using the two

1/4-20 x 1-1/4" flat head screws (E) Fig. 6, and two

1/4-20 lock nuts (F) Fig. 5.

NOTE: Loosely tighten the hardware for further

adjustment.

6. Attach the remaining table bracket to the other side

of the table and frame in the same manner.

7. Insert the 5/16-18 x 3/4" carriage bolt (G) Fig. 7, up

through square hole (H) and slot (J). Secure the

carriage bolt using the 5/16" flat washer (K) Fig. 8

and lock knob (L).

NOTE: Loosely tighten the hardware for further adjust-

ment.

ATTACHING THE TABLE TO THE MACHINE

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Delta 32-325 Instruction Manual Page 9