Delta ts200ls Instruction Manual download pdf (Page 12)

Fig. 14

Fig. 10

Fig. 13Fig. 12

Fig. 11

3. Locate the 1/4-20x2½" hex head screw (G) Fig. 10. Place the 1/4" internal tooth lockwasher (O) M6.4 flat washer

(P) and the 1/4" external tooth lockwasher (R) on the screw (G).

4. Position the recessed end (E) Fig. 11 of the splitter bracket (B) against the end of the pivot rod (F), and fasten using

the assembly in STEP 3.

NOTE: Loosely tighten the hardware for further adjustment.

5. Position the splitter (H) Fig. 13 against the splitter support bracket, making certain the two protrusions (K) on the

splitter support bracket are inside the slot of splitter (H).

6. Attach the splitter (H) Fig. 14 to the splitter support

bracket (B). Place a 1/4" external tooth lockwasher

and an M6.4 flat washer on an M6x1x20mm hex

head screw (L).

7. Insert the screw (L) Fig. 14 through the splitter

support bracket (C) and the splitter (H). Place an

M6.4 flat washer and a 1/4" external tooth lock

washer on the screw (L). Thread an M6x1 wing nut

(M) Fig. 15 on the screw (L) Fig. 15.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

No comments

Delta ts200ls Instruction Manual Page 12