Delta PG-40 Specifications download pdf (Page 68)

VFD-B Series

5-33

Example 1 (Pr.05-15 = 1):

Execute one cycle of the PLC program. Its relative parameter

settings are:

Pr.05-00 to 05-14: 1

to 15

step speed (sets the frequency of each step speed)

Pr.04-04 to 04-09: Multi-Function Input Terminals (set one multi-function terminal as

14 - PLC auto-operation).

Pr.03-00 to 03-03: Multi-Function Output Terminals (set a Multi-Function Terminal as

10-PLC running indication, 11-PLC step completed or 12-PLC

program completed).

Pr.05-16: Direction of operation for the 1

to 15

step speed.

Pr.05-17 to 05-31: Operation time setting of the 1

to 15

step speed.

Program operation

command

Program operation

indication

Step operation

indication

Program operation

fulfillment indication

Note: The above diagram shows one complete PLC cycle. To restart the cycle, turn the PLC

program off and on again.

Example 2 (Pr.05-15 = 2): Continuously executes program cycles:

The diagram above shows the PLC program stepping through each speed. Set Pr.05-15 to 2

continuously executes the program. To stop the PLC program, one must either pause the

program or turn it off. (Refer to Pr.04-04 to 04-09 values 14 and 15).

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 178 179

No comments

Delta PG-40 Specifications Page 68