Delta 78-955 Instruction Manual download pdf (Page 4)

INSTALLATION

Fig. 3

Fig. 4

Fig. 5

Fig. 6

DISCONNECT THE SAW FROM THE POWER SOURCE!

IMPORTANT: The following instructions for

assembling the splitter illustrated in this manual are

shown on a Delta 10” left-tilting arbor Unisaw.

Assembly to a right-tilting arbor saw will be opposite

to what is shown except where noted.

1. Locate the components shown in Fig. 2, for the splitter

assembly.

2. Insert and seat stud (A) Fig. 3 through hole in side of

splitter mounting bracket (B). NOTE: It will be necessary

to have a hammer, punch (C) and a tool with a recessed

hole similar to a deep well socket (D) in order to seat stud

(A) Fig. 3, and used as shown in Fig. 4.

3. Fig. 5 illustrates stud (A) assembled to splitter

mounting bracket for both the left and right tilting arbor

saw.

4. Loosely assemble plate (E) Fig. 6, knob (F), spring (G),

flat washer (H) and E-ring (J) onto stud (A) as shown

assembled in Fig. 7.

LEFT-TILT RIGHT-TILT

E F G H J

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Delta 78-955 Instruction Manual Page 4