INSTRUCTIONST²Fence SystemT²-30 (30" Capacity Fence System)T²-50 (50" Capacity Fence System)PART NO. 911978 - 03-09-04Copyright © 2004 Delta
101010NOTES
111111PARTS, SERVICE OR WARRANTY ASSISTANCEAll Delta Machines and accessories are manufactured to high quality standards and are serviced by a network
The following are trademarks of PORTER-CABLE •DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marquessuivantes sont de
22Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.Indicates a potentially hazardous situatio
333ASSEMBLYFRONT GUIDE RAILFOR MODEL 36-729 ONLY1. Align the two holes in the front guide rail (A) Fig. 3,with the two holes in the front of the table
444REAR GUIDE RAIL1. Align the holes in the rear guide rail with the holes inthe back of the saw table.FOR MODEL 36-729 ONLY2. Insert a 3/8-24x1-1/4&q
555ADJUSTMENTSADJUSTING FENCEPARALLEL TO MITER GAGESLOTSNOTE: Delta table saws have been aligned at the factoryso that the miter gage slots (B) Fig. 1
666OPERATIONSCommon sawing operations include ripping and crosscutting plus a few other standard operations of a fundamentalnature. As with all power
777RIPPINGA RIP FENCE SHOULD ALWAYS BEUSED FOR RIPPING OPERATIONS. NEVERPERFORM A RIPPING OPERATION FREE-HAND. Ripping is the operation of making a le
888MAINTENANCEFENCE LUBRICATION1. Apply paste wax to fence and guide tube sliding sur-faces weekly. 2. Apply grease to cam lock (A) Fig. 32, and cam f
999PUSH STICKMAKE FROM 1/2" OR 3/4"WOOD OR THICKNESSLESS THAN WIDTH OFMAT’L. TO BE CUTCUT OFF HERE TOPUSH 1/4" WOODCUT OFF HERE TOPUSH
Comments to this Manuals