Delta 36-729 User Manual download pdf (Page 3)

333

ASSEMBLY

FRONT GUIDE RAIL

FOR MODEL 36-729 ONLY

1. Align the two holes in the front guide rail (A) Fig. 3,

with the two holes in the front of the table.

2. Insert a M8-1.25x30mm flat head screw (B) Fig. 3,

through the hole in the front guide rail and the table.

3. Place an 8mm flat washer and a 8mm lockwasher

on the screw. Thread a M8x1.25 hex nut onto the screw.

Repeat this process for the remaining hole in the front

guide rail and the table.

4. Use a square (D) Fig. 4 to make sure the front guide

rail is parallel with the table and tighten the two screws

securely, that hold the guide rail to the table.

FOR TABLE SAWS WITH SHEET METAL

EXTENSION WINGS - T

-30 ONLY

NOTE: The T

50 can’t be attached to saws using

sheet metal extension wings.

1. Align the four holes in the front guide rail (not

shown), with the four holes in the front of the table.

2. Insert a M8-1.25x30mm flat head screw through a

hole in the front guide rail and the table.

3. Place an 8mm flat washer and a 8mm lockwasher

on the screw. Thread a M8x1.25 hex nut onto the screw.

Repeat this process for the remaining three holes in the

front guide rail and the table.

4. Use a square (D) Fig. 4 to make sure the front guide

rail is parallel with the table and tighten the hardware

that holds the guide rail to the table.

Fig. 3

Fig. 4

GUIDE TUBE

1. Align the holes on the bottom of the guide tube (C)

Fig. 5 with the holes on the front guide rail (D).

2. Place an 8mm lockwasher on an M8x1.25 x16mm

hex head screw (A) Fig. 5, and insert through the hole in

the front guide rail (D), and thread the screw into the

tapped hole in the bottom of the guide tube (C) and

tighten securely. Repeat this process for the five

remaining holes in the front guide rail and the guide tube

as shown in Fig. 6.

Fig. 6

Fig. 5

1 2 3 4 5 6 7 8 ... 11 12

Comments to this Manuals

No comments

Delta 36-729 User Manual Page 3

Comments to this Manuals

Related products and manuals for Cordless chainsaws Delta 36-729