Delta Embedded DVR User Manual download pdf (Page 128)

128

Parameter Function

PTZ

Activation

Here you can set PTZ movement when alarm occurs. Such as go to

preset x when there is an alarm.

Capture You need to input capture channel number so that system can backup

motion detection snapshot file.

Copy It is a shortcut menu button. You can copy current channel setup to

one or more (all) channels.

Save You can click save button after you complete setup for one channel,

or you can complete the whole setups and then click save button.

Refresh Click this button to get device latest configuration information.

7.3.2.8 PTZ

PTZ interface is shown as in X470H470H470HFigure 7-42X

Please note, before operation please make sure you have set speed dome address. And DVR

and speed dome connection is OK.

Figure 7-42

Please refer to the following sheet for detailed information.

Parameter Function

Channel

You can select monitor channel from the dropdown list. .

Protocol

Select the corresponding dome protocol.(such as PELCOD)

Address

Set corresponding dome address. Default value is 1. Please note your

setup here shall comply with your dome address; otherwise you can

not control the speed dome.

Baud

Rate

Select the dome baud rate. Default setup is 9600.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 161 162

No comments

Delta Embedded DVR User Manual Page 128