Delta SoLiViA 3.3 Installation Manual download pdf (Page 13)

13Operation and installation manual SOLIVIA 3.3 AP G3 TR

length, cable cross-section).

● The recommended installation position is to be adhered to (vertical).

● Unused DC connectors and interfaces must be sealed airtight with sealing plugs to

ensure protection class IP65 for the whole system (inverter & cables).

50 cm

10 cm

50 cm

10 cm

Wall

7.3 Maintenance

Make sure that the device remains uncovered while in operation. To avoid the casing of

the solar inverter becoming soiled, it should be cleaned periodically.

User serviceable parts are not contained in the device. Under no circumstances should

the solar inverter be opened!

7.4 Installation

You should utilize the delivered mounting plate for problem-free installation of the solar

inverter. Installation to the wall should be implemented with the proper screws. Mount

the wall bracket so that the solar inverter only has to be simply attached. After that, the

device is to be bolted on securely.

Assembly instructions

1. Mount the mounting plate with appropriate screws (max. Ø 6mm) into at least four

of the eight holes to x the wall bracket in place. You can employ the mounting

plate as a template for marking the positions of the boreholes.

2. As the solar inverter weighs 21.5 kg, it should be lifted out of the transport crate by

at least two persons.

3. Place the solar inverter onto the mounting plate with at least two persons.

4. Fasten the supplied mounting nuts and washers on the threaded bolt intended for

securing the device.

5. Check that the solar inverter is securely sealed.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

No comments

Delta SoLiViA 3.3 Installation Manual Page 13