Delta 22-790X Instruction Manual download pdf (Page 10)

HOW TO LIFT THE MACHINE

IMPORTANT: Take care when you lift the machine. The

planer is very heavy. Use the following directions and a

MINIMUM OF FOUR PEOPLE to place the machine on

the stand.

        

          

Fig. 15) between the cuttinghead and the table. Lower the

cuttinghead to touch the 2 x 4's. Use four people, one on

each end of the 2 x 4’s, to move the machine.

Fig. 15

ATTACHING TOP COVER AND DUST HOOD

 

planer head using three M6 hex head flange screws at



NOTE: The fourth hole is used later when securing cord

to the planer head.

NOTE: Elevation handwheel shown removed to make

top cover assembly easier.

 

 

washers. Be sure the top lip of the dust collector rests

on top of the top cover as shown in Fig. 13.

3. Attach top of dust collector to top cover with M5

Phillips head self-tapping screws and M5 washers, at



 

HOW TO SECURE THE POWER CORD





M6 washers to secure the cord and fasten the left corner

of the top cover to the planer.

Fig. 11

Fig. 12

Fig. 13

Fig. 14

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 71 72

No comments

Delta 22-790X Instruction Manual Page 10