Delta F-25 User Manual download pdf (Page 9)

DELTA 10 F

8.4- Risk of fire

Each fixture produces heat and must be installed in a well-ventilated place. The minimum recommended

distance from flammable material is 1 MT.

Minimum distance from the object being illuminated is 1 MT.

8.5- Forced ventilation

You will note, on inspection, that the unit features various air inlets and cooling fans located on the head

of the fixture. These should, under no circumstances, be blocked or obstructed whilst the projector is in

operation.

Doing so could cause the fixture to seriously overheat thereby compromising its proper operation.

8.6- Ambient temperature

The projector should never be installed in places that lack a constant air flow. The ambient temperature

should NOT exceed 40°C.

Prior to connecting the unit to your mains supply, ensure that the model in your possession correctly

matches the mains supply available.

9- MAINS CONNECTION:

Delta 10 F can operate at 90-260V, 50 or 60Hz.

For connection purposes, ensure that your plug can handle at least 400W power consuption.

Strict adherence to regulatory norms is strongly Recommended.

9.1 Protection:

The use of a thermal magnetic circuit breaker is recommended for each Delta 10 F.

A good earth connection is essential for the correct operation of the projector

Electronic power supply

90-260VAC 50 / 60Hz

MAINS

FUSE: 6A T

DMX IN / OUT

03.LDF004.T12

03.LDF004.T25

03.LDF004.T45

03.LDF004.T12.WS (WIRELESS DMX READY)

03.LDF004.T25.WS (WIRELESS DMX READY)

03.LDF004.T45.WS (WIRELESS DMX READY)

Electronic power supply

90-260VAC 50 / 60Hz

MAINS

FUSE: 6A T

DMX IN / OUT

Panel connector for

external WIRELESS DMX Antenna

Metal support for

external WIRELESS DMX Antenna

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

No comments

Delta F-25 User Manual Page 9