6
P/N 27793 09/13
BASE INSTALLATION (Continued)
3. Prepare Base
◘ Trace outline of drain and base.
4. Attach Drain
1
2
◘ Attach drain following manufactures’s instructions.
! CAUTION: Plumber’s putty will degrade base material.
Do not use plumber’s putty to seal between drain and base.
Use latex/acrylic sealant or a gasket.
5. Drill Holes in Flange
◘ Drill 3/16" holes at all stud locations on top flanges.
! CAUTION: Drill 3/16" clearance holes into anges only.
Do not drill 3/16" holes directly into studs. Drill chuck can
damage base. Use an extended bit holder to reduce risk
of drill chuck hitting base.
6. Install Drain Pipe
◘ Ensure that the waste pipe is properly located to align with
the drain assembly (not included).
◘ The opening should be 5" in diameter. The drain pipe
should extend 1-3/4" above the subfloor.
3/16"
(0,51cm)
3/16"
(0,51cm)
5"
(12,7cm)
1-3/4"
(4,45cm)
Comments to this Manuals