7
P/N 27793 09/13
BASE INSTALLATION (Continued)
7. Optional
◘ If the subfloor is not flat and level, it is recommended to
put down a mortar bed where the base will be positioned.
8. Apply Adhesive
A
APPLY ADHESIVE on oor and spread using the notched
side of the trowel, starting within pencil line.
9. Final Base Placement
◘ Place base on adhesive covered floor and recheck level.
Adjust if necessary.
10. Insert Cardboard
◘ Insert cardboard or other material into the base to protect
surface.
!
CAUTION: Do not remove until all work has ceased
in room.
MORTAR
Comments to this Manuals