search

Delta 36-979 Instruction Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 37
  • Table of contents
  • TROUBLESHOOTING
    •
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 9
10
HARDWARE
1.
7
/16-20 x
3
/4" Hex Head Screw (6) (For Sheet Metal)
2.
7
/16-20 x 1
1
/4" Hex Head Screw (6) (For Cast Iron)
3.
3
/8-16 x 1
1
/2" Flat Head Screw (1)
4.
5
/16-18 x
3
/4" Carriage Head Screw (12)
5.
5
/16-18 x
5
/8" Carriage Head Screw (42)
6.
1
/4-20 x 1
1
/2" Hex Head Screw (1)
7.
1
/4-20 x
3
/4" Hex Head Screw (2)
8.
7
/16" Flat Washer (6)
9.
3
/8" Flat Washer (1)
10.
5
/16" Flat Washer (37)
11.
1
/4" Flat Washer (3)
12. Pin (2)
13. Spring (1)
14. Motor Pulley Key (1)
15.
7
/16" Lockwasher (6)
16.
3
/8" Lockwasher (1)
17.
5
/16" External Tooth Lockwasher (4)
18.
1
/4" Lockwasher (2)
19.
1
/4" External Tooth Lockwasher (2)
Fig. 4
20.
5
/16-18 Hex Nut (5)
21.
3
/8-16 Hex Nut (1)
22.
1
/4-20 Hex Nut (1)
23.
1
/4-20 Wing Nut (1)
24. Spacer (1)
25.
5
/16-18 Serrated Hex Nut (42)
26.
5
/16-18 x 2
1
/4” Hex Head Cap Screw (2)
27.
5
/16-18 Nylok Nut (3)
28.
5
/16-18 Hex Jam Nut (4)
29. M8 x 20 Hex Head Screw
30. M8 Flat Washer (6)
31. M8 Lock Washer (3)
32. M8 Hex Nut (3)
33.
5
/16-18 x 4” Hex Head Cap Screw (1)
34. M4 x 8mm Pan Head Cap Screw (2)
1
2
3
4
5
6
8
9
10
11
12
14
16
17
18
20
22
23
24
25
7
13
19
15
21
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
DO NOT USE HIGHLY VOLATILE SOLVENTS SUCH AS GASOLINE, NAPHTHA, ACETONE OR LACQUER
THINNER FOR CLEANING YOUR SAW.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
ASSEMBLY
ASSEMBLY TOOLS REQUIRED
*7/8" Open End Wrench (supplied)
* 7/8" and 1/2" Close End Wrench (supplied)
* 4mm Allen Wrench (supplied)
* 1/4” Allen Wrench (not supplied)
* Socket or Open-End Wrenches, including 10mm, 12mm, 18mm,1/2 inch and 9/16 inch (not supplied)
32
33
34
26
27
28
29
30
31
ASSEMBLY TIME ESTIMATE
Assembly for this machine takes approximately 4-6 hours.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 36 37

Comments to this Manuals

No comments
Related products and manuals for Circular saws Delta 36-979
Circular saws Delta SS350 User Manual   (18 pages)
Circular saws Delta ShopMaster SM400 User Manual   (17 pages)
Circular saws Delta RS830 Instruction Manual   (33 pages)
Circular saws Delta 28-280 User Manual   (2 pages)
Circular saws Delta 36-979 Instruction Manual   (15 pages)
Circular saws Delta 28-185 User Manual   (1 pages)
Circular saws Delta 78-960 User Manual   (12 pages)
Circular saws Delta BS220LS User Manual   (20 pages)
Circular saws Delta 78-955 Instruction Manual   (12 pages)
Circular saws Delta BS100 User Manual   (24 pages)
Circular saws Delta SHOPMASTER SM200L Instruction Manual     (77 pages)
Circular saws Delta 28-276 User Manual   (28 pages)
  • Emtec Qihan Jscar ORIENT Clarke
  • Netgear Camera accessories Honeywell Fireplaces Rubbermaid Vacuum cleaners Emerson Other input devices Avaya Access control readers
  • Brother HL 5250DN Pyle PRJLE33 Taylor 1520 JVC KD-ADV6270 Roland a-37
  • Hotpoint RVM1625 User Manual Little GIANT 506065 Instruction Manual Allied Telesis AT-CM3K0S User's Guide Samsung UBD-M8500 User Manual Audiovox MMD102 User Manual