Delta RS830 Instruction Manual download pdf (Page 27)

PUSH STICK

Make from 1/2" OR 3/4" WOOD or

thickness less than

width of material to be cut.

Cut here to push 1/4" wood.

Cut here to push 1/2" wood.

1/2" Squares

CONSTRUCTING A PUSH STICK

When ripping work less than 6" wide, a push-stick should be used to complete the feed and could easily be

made from scrap material by following the pattern shown in Fig. 83.

Make a push-stick from plywood or softwood, equal to or less than the width of the material to be cut.

Notch to help

prevent hand

from slipping.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 87 88

No comments

Delta RS830 Instruction Manual Page 27