Delta Sidekick 36-210 Instruction Manual download pdf (Page 6)

Fig. 8

Fig. 7

Fig. 6

Fig. 5

ROTATING TABLE TO THE

90 DEGREE POSITION

1. Loosen table locking handle (A) Fig. 5, one turn and

pull back locking trigger (B). Rotate table until plunger

(C)is engaged into the 90 degree stop (D). Then tighten

handle (A).

ASSEMBLING DUST SPOUT

1. Insert smooth end of dust spout (A) Fig. 6, into open-

ing on bottom of blade guard, as shown.

ASSEMBLING DUST BAG

1. Assemble dust bag (B) Fig. 7, to free end of

dust spout (A) as shown.

ASSEMBLING WORK CLAMP

1. The work clamp (A) Fig. 8, can be used on either the

right or left side of the saw base. Insert post of work

clamp (A) into the hole located on either the right or left

side of the saw base.

2. WARNING: Keep hands out of path of saw blade. If

the workpiece you are cutting would cause your hand to

be within 4 inches of the saw blade, the workpiece

should be clamped in place before making cut.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Delta Sidekick 36-210 Instruction Manual Page 6