Delta 36-714 User Manual download pdf (Page 31)

MAINTENANCE

KEEP MACHINE CLEAN

Periodically blow out all air passages with dry compressed

air. All plastic parts should be cleaned with a soft damp

cloth. NEVER use solvents to clean plastic parts. They

could possibly dissolve or otherwise damage the material.

Wear certified safety equipment for eye,

hearing and respiratory protection while

using compressed air.

FAILURE TO START

Should your machine fail to start, check to make sure

the prongs on the cord plug are making good contact

in the outlet. Also, check for blown fuses or open circuit

breakers in the line.

LUBRICATION & RUST PROTECTION

Apply household floor paste wax to the machine table

and extension table or other work surface weekly. Or use

a commercially available protective product designed for

this purpose. Follow the manufacturer’s instructions for

use and safety.

To clean cast iron tables of rust, you will need the

following materials: a pushblock from a jointer, a sheet

of medium Scotch-Brite™ Blending Hand Pad, a can of

WD-40

and a can of degreaser. Apply the WD-40 and

polish the table surface with the Scotch-Brite pad using

the pushblock as a holddown. Degrease the table, then

apply the protective product as described above.

BLADE RAISING AND BEVELING

If the blade raising and leveling mechanisms become

difficult to operate, clean sawdust from the worm and

sector gears (shown in Fig. 71). Apply a graphite-based

lubricant that will not attract and hold dust.

REPLACEMENT PARTS

Use only identical replacement parts. For a parts list or to

order parts, visit our website at

servicenet.deltamachinery.

com.

You can also order parts from your nearest factory-

owned branch, or by calling our Customer Care Center at

1-800-223-7278 to receive personalized support from highly-

trained technicians.

SERVICE AND REPAIRS

All quality tools will eventually require servicing and/or

replacement of parts. For information about Delta Machinery,

its factory-owned branches, or an Authorized Warranty

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and

Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of

your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use

of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be

used with this product.

ACCESSORIES

SERVICE

Service Center, visit our website at www.deltamachinery.

com or call our Customer Care Center at 1-800-223-7278.

All repairs made by our service centers are fully guaranteed

against defective material and workmanship. We cannot

guarantee repairs made or attempted by others.

You can also write to us for information at Delta Machinery,

4825 Highway 45 North, Jackson, Tennessee 38305 -

Attention: Product Service. Be sure to include all of the

information shown on the nameplate of your tool (model

number, type, serial number, etc.)

1 2 ... 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments

Delta 36-714 User Manual Page 31

Comments to this Manuals

Related products and manuals for Power saws Delta 36-714