Delta 14-650 Instruction Manual download pdf (Page 4)

A - Mortising Machine

B - Hydraulic Cylinder

C - Raising and Lowering Handle

D - Special Screw (for raising and lowering handle)

E - Spring (for raising and lowering handle)

F - Table

G - M6 x 35mm Flat Head Screws (for assembling

table to base)

H - T-Nuts (for assembling table to base)

J - Fence

K - Bar (for mounting holddown)

UNPACKING AND CLEANING

Carefully unpack the mortiser and all loose items from the carton. Remove the protective coating from the machined

surfaces of the mortiser. This coating may be removed with a soft cloth moistened with kerosene. Do not use acetone,

gasoline, or lacquer thinner for this purpose. Fig. 2 illustrates the mortiser and all loose items removed from the carton.

L - Holddown

M - Chuck Key

N - Wrench

O - Tool and Chisel Holder

P - M6 x 25mm Screws (for assembling tool and

chisel

holder)

* - Flat Washers (for assembling tool and chisel holder)

R - Fence Locking Handle Assembly

* - Not Shown

Fig. 2

1 2 3 4 5 6 7 8 9 ... 17 18

No comments

Delta 14-650 Instruction Manual Page 4