Delta 14-650 Instruction Manual download pdf (Page 6)

Fig. 6

Fig. 7

Fig. 8

ASSEMBLING TABLE

1. Assemble the table (A) Fig. 7, to the base using the

two M6 x 35mm flat head screws (B) and T-nuts (C).

Insert the two screws (B) into the two holes (D) in table

board (A). Place the two T-nuts (C) into the slots

provided in the bottom of the base and tighten the two

screws (B) into the two T-nuts (C) securely.

2. The table (A) Fig. 7, can be moved in or out by

loosening the two screws (B), and re-positioning the

table, and then tightening screws (B).

ASSEMBLING FENCE

AND HOLDDOWN

1. Locate handle assembly and remove screw (A) Fig. 8,

and spring (B) from handle (C). Seperate handle (C) from

stud (D). Do not lose spring (B).

2. Fig. 6, illustrates the hydraulic cylinder (B) assembled

to the machine. The hydraulic cylinder (B) keeps the

head in the up position.

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

No comments

Delta 14-650 Instruction Manual Page 6