Delta 23-725 Instruction Manual download pdf (Page 12)

12 - English

DUST PORT

There is one dust port located on the rear of each

grinding wheel cover; this dust port enables the user to

attach a dust collection system to the grinder. Fig. 13.

When using a dust collection system

with this metal grinding tool, be sure the dust collector

is designed to accept hot metal shavings.

Fig. 13

Keep the spark guards and eye shields

in place at all times.

Figures 14, 15, and 16 illustrate several typical operations

that can be accomplished using the grinder. Each tool

rest should be positioned a little below the center of the

grinding wheel and adjusted so that the edge of the tool

rest is a distance of 1/8" (3.2 mm) or less from the wheel.

This will provide maximum support to the workpiece and

is the safest position for general work.

As the grinding wheel wears down, readjust the tool rest

closer to the grinding wheel. Always maintain a distance

of 1/8" (3.2 mm) or less between the grinding wheel and

the edge of the tool rest. Free hand grinding (without the

use of the tool rest) should always be done on the lower

quarter of the grinding wheel. Read and follow all of the

"SAFETY RULES" in this manual.

MACHINE USE

Fig. 14

Fig. 15

Fig. 16

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

No comments

Delta 23-725 Instruction Manual Page 12