Delta 70-200 User Manual download pdf (Page 6)

UNPACKING AND CLEANING

Carefully unpack the drill press and all loose items from the carton. Remove the protective coating from the

machined surfaces of the drill press and all loose items. This coating may be removed with a soft cloth moist-

ened with kerosene. DO NOT USE ACETONE, GASOLINE, OR LACQUER THINNER FOR THIS PURPOSE.

Fig. 2

Fig. 3

ASSEMBLING THE

DRILL PRESS

1. Assemble column (A) Fig. 2, to base (B) using four

M-12 x 45mm long hex head screws (three of which are

shown at [C]). Loosen set screw in collar (D) and remove

collar (D) and raising rack (E).

2. Remove bolt (F) Fig. 3, and remove table (G) from

table bracket (H).

1 2 3 4 5 6 7 ... 17

No comments

Delta 70-200 User Manual Page 6