Delta 50-762 Instruction Manual download pdf (Page 12)

Fig. 14

Fig. 15

Fig. 16

MODEL 50-763 SINGLE

PHASE INSTALLATION

Your dust collector is supplied with a motor and a

magnetic starter controller and must be permanently

connected to the building’s electrical system and

grounded to meet code.

1. To connect the dust collector to a power system,

remove controller cover which will be similar to (A)

Fig. 14.

2. Bring the single phase power line through the access

hole (B) Fig. 14, in the bottom of controller box and

connect the two power lines to terminals (E) Fig. 16,

and the green ground wire to ground screw (F).

BE SURE TO REINSTALL COVER

BEFORE OPERATING.

DO NOT INSERT FINGERS OR ANY

FOREIGN OBJECT INTO THE DUST

INTAKE PORT.

MODEL 50-762 THREE

PHASE INSTALLATION

Your dust collector is supplied with a motor and a

magnetic starter controller and must be permanently

connected to the building’s electrical system and

grounded to meet code.

1. To connect the dust collector to a power system,

remove controller cover (A) Fig. 14.

2. Bring three phase power line through the access

hole (B) Fig. 14, in the bottom of controller box and

connect the three power lines to terminals (C) Fig.

15, and the green ground wire to ground screw (D).

BE SURE TO REINSTALL COVER

BEFORE OPERATING.

DO NOT INSERT FINGERS OR ANY

FOREIGN OBJECT INTO THE DUST

INTAKE PORT.

MAKE SURE UNIT IS PROPERLY

GROUNDED.

3. After connecting the power cord to the machine,

make certain the rotation of the motor is in the proper

direction by viewing the rotation of the blower fan.

The fan should rotate in a clockwise direction.

Rotation of the motor can be reversed by

interchanging any two of the three incoming power

lines connected to terminals (C) Fig. 15.

BE SURE TO DISCONNECT

MACHINE AT POWER SOURCE

BEFORE REVERSING WIRES.

SINGLE AND THREE PHASE WIRING

INSTALLATION BY A QUALIFIED ELECTRICIAN IS RECOMMENDED TO ASSURE SAFE AND

PROPER WIRING AND PRODUCT OPERATION.

DISCONNECT POWER AT SOURCE

BEFORE WIRING THE MACHINE.

MAKE SURE UNIT IS PROPERLY

GROUNDED.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Delta 50-762 Instruction Manual Page 12

Comments to this Manuals

Related products and manuals for Dust covers Delta 50-762