Delta 36-978 Instruction Manual download pdf (Page 11)

Loosely thread the end of the dust bag strap (A) through the clamp (B) (Fig. 19). Place the open end of the dust bag

(C) Fig. 19 over the outlet flange (D) Fig. 20 . Firmly pull the strap (A) to fasten the dust collection bag to the outlet

flange.

ATTACHING THE DUST BAG TO THE DUST COLLECTOR

Disconnect the machine from the power source!

Fig. 18

Fig. 19

OPERATION

For operator safety, make certain the dust intake port is covered with the hose before operating the machine.

The rotating fan inside the blower housing is accessible through the dust intake port and is hazardous. Make sure intake cap covers the

intake port when hose is removed. Always wear proper apparel. Do not wear jewelry and keep fingers and all foreign objects out of the

dust intake port. Always follow the safety rules of this manual.

OPERATIONAL CONTROLS AND ADJUSTMENTS

1. The on/off switch (A) Fig. 20 is located on the front of

the machine. To turn the machine “ON”, move the

switch up to the “ON” position.

2. To turn the machine “OFF”, move the switch (A) down

to the “OFF” position.

STARTING AND STOPPING THE DUST COLLECTOR

Make sure that the switch is in the “OFF” position before plugging in the power cord. In the event of a

power failure, move the switch to the “OFF” position. An accidental start-up can cause injury.

Fig. 20

IMPORTANT: When the machine is not in use, the

switch should be locked in the “OFF” position to prevent

unauthorized use. To lock the machine, grasp the switch

toggle (B) Fig. 21, and pulling it out of the switch as

shown. With the switch toggle (B) removed, the switch

will not operate. However, should the switch toggle be

removed while the machine is running, it can be turned

“OFF” once, but cannot be restarted without re-inserting

the switch toggle (B).

LOCKING THE SWITCH IN THE “OFF” POSITION

Fig. 21

1 2 ... 6 7 8 9 10 11 12 13 14 15

No comments

Delta 36-978 Instruction Manual Page 11