Delta 36-978 Instruction Manual download pdf (Page 8)

INSTALLING THE CASTERS

1. Place the dust collector on its side.

2. Insert a caster through the four holes (A) Fig. 3 in the base of the dust collector.

3. Thread a 3/8-16 flange hex nut (B) Fig. 4 onto each of the four bolts and tighten securely.

Fig. 3

INSTALLING THE EXHAUST FLANGE

1. Align the holes in the exhaust flange (A) Fig. 5 with the holes in the exhaust flange gasket (B).

2. Insert a 5/16-18x5/8" hex-head bolt through the exhaust flange, the exhaust flange gasket, and the base unit (Fig.

6).

3. Thread a 5/16-18 hex nut (B) onto the 5/16-18x5/8" hex head bolt (A) Fig. 6 and tighten securely.

4. Repeat this process for the three remaining bolts.

1/2” & 9/16" Open or Box End Wrench - not provided

1/2” &

9/16" Socket and Drive - not provided

Flat or Phillips Screwdriver - not provided

ASSEMBLY

For your own safety, do not connect the machine to the power source until the machine is

completely assembled and you read and understand the entire instruction manual.

ASSEMBLY TOOLS REQUIRED

ASSEMBLY TIME ESTIMATE

Assembly for this machine takes approximately 1-2 hours.

Fig. 4

Fig. 5

Fig. 6

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No comments

Delta 36-978 Instruction Manual Page 8