Delta DC-580 20" PLANER 22-450 User Manual download pdf (Page 11)

Fig. 13

Fig. 14

RAISING AND LOWERING TABLE

Adjust the table height by loosening lock knob (A) Fig.

15, and rotating table adjusting handwheel (B). To raise

the table, turn handwheel (B) clockwise; to lower the

table, turn handwheel (B) counterclockwise. Tighten

lock knob (A) Fig. 15, after table height adjustment is

made. The English/Metric table height scale (C) Fig. 15,

indicates the table height setting. IMPORTANT: For best

results, setting of the table should always be made from

the bottom to the up position.

Fig. 15

OPERATION

OPERATIONAL CONTROLS AND ADJUSTMENTS

STARTING AND STOPPING THE PLANER

1. The power switch (A) Fig. 13 is located on the front of

the planer. To turn the machine on, push the “START”

button.

2. To turn the machine off, push the stop button (B).

LOCKING SWITCH IN “OFF” POSITION

IMPORTANT: When the machine is not in use, the

switch should be locked in the off position to prevent

unauthorized use,

using a padlock (C) Fig. 14 with a

3/16" diameter shackle.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Delta DC-580 20" PLANER 22-450 User Manual Page 11