Delta 50-665 Instruction Manual download pdf (Page 6)

ASSEMBLY

1. Place gasket (A) Fig. 3, on bottom of motor and

blower assembly (B). Align four holes in gasket with

holes in motor and blower assembly and assemble cover

four hex head screws, flat washers, lockwashers, and

locknut s (D).

3. Peel the adhesive p aper (E) Fig. 5, from the back of

the gasket material (F) and press the gasket material

around the underside of the dust collector cover (C). Cut

of f any excess gasket material.

4. Carefully turn the assembly over . Place gasket (G)

Fig. 6, over two holes in cover (C) and secure upper inlet

elbow (H) to cover with two 3/8-16 x 1-1/4 hex head

screws and flat washers (J), as shown in Fig. 7.

2. Fig. 4, illustrates the cover (C) assembled to the

underside of motor and blower assembly (B).

Fig. 3

Fig. 4

Fig. 6Fig. 5

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Delta 50-665 Instruction Manual Page 6