Delta 31-735 Instruction Manual download pdf (Page 9)

Fig. 2E

Fig. 2D

Fig. 2F

7. Insert a 5/16-18x4" hex head screw (G) Fig. 2D,

through the hole (F) Fig. 2C, in the pivot bracket, the two

holes (E) in the caster assembly and the other hole (F) in

the pivot bracket. Thread a 5/16-18 lock nut onto the

screw and tighten securely.

8. Align the two holes (H) Fig 2E, in the foot lever, with

the two holes (J) in the pivot bracket.

9. Assemble foot lever (N) Fig. 2F, to pivot bracket (O),

using 1/2"x4" pin (M), two 1/2" flat washers (K), and two

retaining rings (P) as shown in Fig. 2F.

10. Stand the motor cabinet up on its base.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

No comments

Delta 31-735 Instruction Manual Page 9