Delta 31 Instruction Manual download pdf (Page 19)

OPERATIONS

Fig. 47

Fig. 48

The Oscillating Edge Sander can be used to perform

many different sanding operations. The following

examples will show some of the applications that this

machine can be used for.

1. Fig. 48 shows sanding with the fence.

Only use the fence when the belt sander

is at 0 degrees to the table

Fig. 49

2. Fig. 49 shows sanding with the miter gage.

Fig. 50

3. Fig. 50 shows sanding at 0 degrees to the table

with out the fence.

4. Your miter gage is equipped with a plate (E) Fig. 47,

which fits into the T-Slot groove in the table. This allows

the miter gage to be pulled off the front edge of the table

without falling.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

No comments

Delta 31 Instruction Manual Page 19