Delta 36-655 Instruction Manual download pdf (Page 11)

Attaching Fence Rails and Sliding

Extension Table

Figure 15

Loosely attach square head screws (4), flat washers (4),

and hex nuts (4) to the front edge of saw table and

extension wings. Square heads are to be to the front.

Figure 16

Slide front rail (A) over square head screws using channel

(B) on back side of rail. Extend right side of front rail 17 3/

4” past edge of right extension wing, then tighten all

screws.

Figure 17

Attach rear rail (A) in same manner as front rail. Extend

rear rail 12 1/2” past edge of right extension wing. Tighten

all screws.

Fig. 15

Fig. 16

Figure 18

With sliding extension table (A) flipped over, loosely

assemble adjusting brackets (B) and hardware as

indicated.

Fig. 18

Fig. 17

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Delta 36-655 Instruction Manual Page 11