Delta 36-655 Instruction Manual download pdf (Page 6)

Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire

extension cord which has a 3-prong grounding type plug and matching receptacle which will accept the machine’s

plug. When using an extension cord, be sure to use one heavy enough to carry the current of the machine. An

undersized cord will cause a drop in line voltage, resulting in loss of power and overheating. Fig. 3A/B, shows the

correct gauge to use depending on the cord length. If in doubt, use the next heavier gauge. The smaller the gauge

number, the heavier the cord.

EXTENSION CORDS

Fig. 3A Fig. 3B

0-6 120 up to 25 18 AWG

0-6 120 25-50 16 AWG

0-6 120 50-100 16 AWG

0-6 120 100-150 14 AWG

6-10 120 up to 25 18 AWG

6-10 120 25-50 16 AWG

6-10 120 50-100 14 AWG

6-10 120 100-150 12 AWG

10-12 120 up to 25 16 AWG

10-12 120 25-50 16 AWG

10-12 120 50-100 14 AWG

10-12 120 100-150 12 AWG

12-16 120 up to 25 14 AWG

12-16 120 25-50 12 AWG

12-16 120

GREATER THAN 50 FEET NOT RECOMMENDED

MINIMUM GAUGE EXTENSION CORD

RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES

Ampere

Rating

Volts

Total Length

of Cord in Feet

Guage of

Extension Cord

0-6 240 up to 50 18 AWG

0-6 240 50-100 16 AWG

0-6 240 100-200 16 AWG

0-6 240 200-300 14 AWG

6-10 240 up to 50 18 AWG

6-10 240 50-100 16 AWG

6-10 240 100-200 14 AWG

6-10 240 200-300 12 AWG

10-12 240 up to 50 16 AWG

10-12 240 50-100 16 AWG

10-12 240 100-200 14 AWG

10-12 240 200-300 12 AWG

12-16 240 up to 50 14 AWG

12-16 240 50-100 12 AWG

12-16 240

GREATER THAN 100 FEET NOT RECOMMENDED

MINIMUM GAUGE EXTENSION CORD

RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES

Ampere

Rating

Volts

Total Length

of Cord in Feet

Guage of

Extension Cord

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all

unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or

lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

OPERATING INSTRUCTIONS

FOREWORD Delta Model 36-655 is a 10” Tilting Arbour Saw. The Model 36-655 has a powerful 1-3/4 HP induction motor

which can handle tough cutting operations. The Model 36-655 comes with a heavy duty fence system with a 30” rip capacity to

the right of the blade and a 24” rip capacity to the left of blade.

Figure 4

The basic saw unit is shipped as shown here.

NOTICE: THE MANUAL COVER PHOTO ILLUSTRATES THE CURRENT PRODUCTION MODEL. ALL OTHER

ILLUSTRATIONS ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING OR

ACCESSORIES AND MAY BE INTENDED TO ILLUSTRATE TECHNIQUE ONLY.

Fig. 4

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comments to this Manuals

No comments

Delta 36-655 Instruction Manual Page 6

Comments to this Manuals

Related products and manuals for Circular saws Delta 36-655