Delta 36-655 Instruction Manual download pdf (Page 16)

Tool Holders and Rail End Caps

Figure 39

Install front and rear end caps (A) on both ends of fence

rails using self tapping screws (4). Install fence holders (B)

using self tapping pan head screws (4). Install wrench

hook (C) using self tapping pan head screws (2). Install

miter gage holder (D) using self tapping pan head screws

(4).

Figure 40

Attach dust port (A) to saw cabinet using pan head screws

(4) and hex nuts (4).

Figure 41

Turn fence body (A) on its side. Attach micro-adjusting

knob (B) to fence using button head screws (2).

Fig. 39

Fig. 40

Figure 42

With the fence locking handle (A) in the raised position,

lower the rip fence (B) onto the fence rail (C). Lock the rip

fence by pushing down handle (A).

Fig. 42

Fig. 41

Dust Port

DISCONNECT TOOL FROM POWER

SOURCE.

Fence and Micro-Adjusting Knob

DISCONNECT TOOL FROM POWER

SOURCE.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Delta 36-655 Instruction Manual Page 16