Delta 40-690 Instruction Manual download pdf (Page 7)

ASSEMBLY

To reduce the risk of injury, turn unit off and disconnect it from power source before installing and

removing accessories, before adjusting or when making repairs. 

ASSEMBLY TOOLS REQUIRED







ASSEMBLY TIME ESTIMATE

Assembly for this machine stand and light takes



SCROLL SAW STAND (40-691)

FOLLOW THESE RULES WHEN USING

THE STAND:

 

  

 



washers and nuts are provided for this purpose.

  

  

  

  

ASSEMBLY/ADJUSTMENT OF STAND (FIG. 1)





and nuts. Leave carriage bolts slightly loose until scroll

saw is secured to stand.

The rear leg of the stand is adjustable. Select the desired

height, ensure the rear leg is vertical, and firmly tighten

all four bolts shown.

NOTE:

assembled.

MOUNTING THE SAW TO STAND

        





onto the stand, keeping fingers and hands clear of the

stand.

   

through the underside of the stand and through the three

mounting holes in the scroll saw base. Secure the saw

to the stand by firmly tightening these three bolts and the

matching flat washer, lockwasher and nuts.

Tighten all carriage bolts on the stand after securing the

saw in place.

UNPACKING AND CLEANING



unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.

Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your

machine.



FIG. 1

FIG. 2

MOUNTING

HOLES

ADJUSTABLE LEG

TOOL MOUNTING HOLES

FLOOR MOUNTING HOLES

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Comments to this Manuals

No comments

Delta 40-690 Instruction Manual Page 7

Comments to this Manuals

Related products and manuals for Circular saws Delta 40-690