Delta RS830 Instruction Manual download pdf (Page 27)

MAINTENANCE

OVERLOAD PROTECTION

The motor on your saw is equipped with a resettable

overload relay (A) Fig. 82. If the motor shuts off or fails to

start due to overloading, or low voltage, turn the switch

to the “OFF” position, let the motor cool three to five

minutes then push the reset button (A). The motor can

then be turned on again in the usual manner. Some

conditions that may cause overloading are; cutting stock

too fast, using a dull blade, using the saw beyond its

capacity, etc.

Fig. 82

1 2 ... 22 23 24 25 26 27 28 29 30

No comments

Delta RS830 Instruction Manual Page 27