Delta 4000 Instruction Manual download pdf (Page 94)

81331 Rev 01 Nov 2010

96005 – CABLES

Because of the many variations of cable installations, this test form is designed

for flexibility in capturing test information and results.

Included is a normal "header" where location and test conditions are recorded, as

well as a Cable Nameplate area for detailing specific information about the cable

to be tested.

To allow for flexibility, the test table in this form is designed to grow by a line

with every test added. This permits any number of cables to be tested, multiple

times if necessary.

Specific information (phase designation, termination, etc.) about the cable

insulation being tested should be entered in the Insulation Tested column. The

appropriate test configuration must be selected from the dropdown list.

To initiate the test, right-click on the Test No in the left-most column of the

table and follow the prompts provided in the pop-up window. At the conclusion

of the test, the results will populate into the fields of the selected test row.

Continue testing as necessary by moving to the next row and repeating the same

steps.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 107 108

No comments

Delta 4000 Instruction Manual Page 94