Delta 37-380 Instruction Manual download pdf (Page 14)

OPERATING CONTROLS AND ADJUSTMENTS

STARTING AND STOPPING

JOINTER

1. The on/off switch is located underneath the switch

shield (B) Fig. 31. To start the jointer, move switch (A) up

to the “ON” position.

2. To turn the jointer “OFF”, push down on switch

shield (B) Fig. 32, as shown.

Fig. 31

Fig. 32

LOCKING SWITCH

IN THE “OFF” POSITION

IMPORTANT: When the tool is not in use, the switch

should be locked in the “OFF” position to prevent

unauthorized use. Insert the shank of padlock (C) Fig.

33, through the holes in the switch plate to lock the

on/off switch trigger (A).

Fig. 33

INFEED TABLE

ADJUSTMENTS

1. To raise or lower the infeed table, loosen table

locking handle (A) Fig. 34, which is located at the rear of

the infeed table and loosen locking handle (B) Fig. 35,

which is located at the front of the infeed table.

Fig. 34

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

No comments

Delta 37-380 Instruction Manual Page 14