Delta PG-40 Specifications download pdf (Page 162)

VFD-B Series

B-19

Section 3 PG-02 Terminal Descriptions

3.1) Terminals

Terminal Symbols Descriptions

Power source of PG-02 (FSW1 can be switched to 12V or 5V)

Output Voltage: (+12VDC ±5% 200mA) or (+5VDC ±2% 400mA)

DCM

Power source (VP) and input signal (A, B) common

A, A, B, B

Input signal from Pulse Generator. Input type is selected by FSW2.

Please See section 3.4. Maximum 500KP/Sec

A/O, B/O

PG-02 output signal for use with RPM Meter. (Open Collector)

Maximum DC24V 100mA

COM

PG-02 output signal (A/O, B/O) common.

3.2) Wiring Notes

The control, power supply and motor leads must be laid separately. They must not be

fed through the same cable conduit / trunking.

1. Please use a shield cable to prevent interference. Do not run control wire parallel to any

high voltage AC power line (220 V and up).

2. Connect shielded wire to E only.

3. Recommended wire size 0.21 to 0.81mm

(AWG24 to AWG18).

4. Wire length:

Types of Pulse

Generators

Maximum Wire Length Wire Gauge

Output Voltage 50m

Open Collector 50m

Line Driver 300m

Complementary 70m

1.25mm

(AWG16) or above

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 178 179

No comments

Delta PG-40 Specifications Page 162