Delta 36-075 User Manual download pdf (Page 3)

3

WHEEL BRACKET ASSEMBLY

1

BAG

Hammer on end

caps

Attach Wheels

First remove end caps. With the workstation

upside-down and legs in the closed position,

align holes on the wheel bracket with those on

the leg bracket. Insert 1/4’

’

screws at the

widest end of the bracket.

Tighten by holding the screw head with a

5/32’’ allen wrench and turning the nut with a

7/16’’ wrench.

Unfold the legs and fasten the remaining two

screws, as in the previous step.

Be sure that nuts face out-

ward.

Set up Main Beam

Set up beam by folding out each of the legs.

Make sure the brass pin

clicks, locking the legs in

position.

Wheel bracket can be

attached to either end

of the workstation

1 2

3

!

WARNING

!

W

ARNING

1 2 3 4 5 6 7 8 ... 27 28

Comments to this Manuals

No comments