Delta 36-220 Service Manual download pdf (Page 18)

--- 15 ---

Item

No.

Disassembly

spots

Disassembly procedure Necessary tools

4 Table

Base

Fig. 15

Phillips

Screwdriver

13 mm box

wrench

1. Remove the four Machine Screws M4 x 8 [65] and the Table Insert

[67].

2. Turn the Handle Bar [61] counterclockwise and remove it.

3. With a 13 mm box wrench, remove the Chuck Nut M8 [58] and the

Flat Washer M8 [59] from the insert space of the Table [60].

Extract the Center Shaft [75] which fixes the Table [60] to the Base

[74] by lifting the Table [60] upward.

Be careful not to lose the Steel Ball D8 [62] as it can be removed

from the Base [74] after removing the Table [60].

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 34 35

No comments

Delta 36-220 Service Manual Page 18