Delta 22-580 Instruction Manual download pdf (Page 8)

CARTON CONTENTS

Fig. 2

1. 13" Two-Speed Finishing Planer

2. Cutterhead Adjusting Handle

3. Cutterhead Lock Handle

ASSEMBLY

To attach an optional dust collection attachment (A) Fig. 1 to mount a dust collection system to the planer.

1. Remove the two screws (A) Fig. 2 that secure the cutterhead guard.

2. Place the dust connector in the slots provided and replace the cutterhead guard screws(A) Fig. 2.

NOTE: You can mount the attachment on either side of the machine.

4. M5-16mm Hex Socket Head Screw

5. M6-20 mm Hex Socket Head Screw

6. Knife Transfer Tool

7. Cutterhead Wrench and Handle Combination

Fig. 1

For your own safety, do not connect the machine to the power source until the machine is

completely assembled and you read and understand the entire instruction manual.

ASSEMBLY TOOLS REQUIRED

ASSEMBLY TIME ESTIMATE

OPTIONAL 4" REVERSIBLE DUST COLLECTION ATTACHMENT

Fig. 2

Cutterhead Wrench (Supplied)

Approximately 1/2 hour

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

No comments

Delta 22-580 Instruction Manual Page 8